Helium Charge System from LACO Technologies

The Helium Charge System is a PLC-based system to proof test, decay leak test, charge, and evacuate products for tracer gas leak testing. LACO's Charge System can be employed to perform a number of functions, from filling the part or system with helium to pre-testing the part for massive leaks to reduce catastrophic part failures.

Available in tabletop and workstation configurations.

Simple Charge Sequence

Evacuate to vacuum level
Charge with helium
Leak test
Vent tracer gas

Please contact us with your requirements at 800.465.1004 or email to info@lacotech.com and we will configure a HCS for your application.

System Options
Custom options also available

Vacuum decay test
Post leak test purge, evacuation, N2 fill (to clean and protect part until refirgerant)
Dedicated helium recovery exhaust port/valve
Nitrogen high pressure proof test with pressure decay
Gas blender
Flow/occlusion test (to check for blockage in tubes)
Serial interface to Protec, Inficon P3000, or Alcatel 142S
Dual pressure helium fill
Barcode reader

Helium Charge System Table Top

Helium Charge System
Table Top Configuration

Helium Charge System Workstation

Helium Charge System
Workstation Configuration

Leak Testing Systems

Helium Charge System

Leak Testing

APPLICATIONS

VACUUM TECHNOLOGY

LEAK TESTING

CALIBRATED LEAKS

SERVICES