HELIUM LEAK DETECTORS FOR YOUR maintenance and SERVICE NEEDS
LACO's TITANTEST™ M-Series Helium Mass Spectrometer Leak Detectors are configured to give you the features and accessories you need specifically for maintenance and service applications—at an affordable price. All TITANTEST M-Series Helium Leak Detectors include a sniffer probe and a spray probe.
SPECIFICATIONS
Component | Specification |
---|---|
Minimum detectable helium leak rate (ultra fine vacuum mode) | <5 x 10-12 atm.cc/sec |
Minimum detectable helium leak rate (sniffing mode) | 5 x 10-8 atm.cc/sec |
Maximum inlet pressure | 25 mbar |
Inlet helium pumping speed (ultra fine mode) | 2.5 L/sec |
Roughing pump capacity | 3.5 CFM |
Inlet test port configuration | NW25 |
Detectable gases | He4, He3, and H2 |
Start-up time | < 3 minutes |
Response time | < 0.5 seconds |
Ambient operating temperature | 50° F to 96° F |
Operating voltage (single phase) | 115/230 VAC, 50/60 Hz |
Approx. weight (bench-top model) | 100 lbs. |
Approx. dimensions (bench-top model) | 22" L x 18" W x 12" H |